CustomMade to order
Made to order
Custom Championship Belt, Gold Plated (CNC build)
$370.00
This listing is one fixed build.
The build is set out below. If you want a different build, thickness or finish, ask us for a quote.
Delivery and returns
- Made to order in our workshop, which has been making belts for over a decade. Most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. These are estimates, not guarantees.
- Free worldwide courier shipping (UPS, FedEx or DHL), tracked and insured.
- Import duties prepaid (DDP): nothing to pay on delivery.
- Cancel free of charge within 24 hours of ordering.
- Made to order, so no change-of-mind returns. Arrived damaged, faulty or not as ordered? Email us photos within 14 days of delivery and we repair, replace or refund it. If we ask for the belt back, we pay the return shipping. Returns policy
- Lifetime warranty on plating, hardware and stitching.
A question before you order? Email support@msbelts.com
Custom Championship Belt, Gold Plated (CNC build)
Total: $370.00
Belt explained
What you are buying
Every belt is a set of metal plates fixed to a leather strap. Here is what each part is, what this belt is made of and how long it takes.
The parts of a belt
Illustration
- 1 Centre plate The large plate in the middle of the belt. It carries the main design.
- 2 Side plates Smaller plates set on each side of the centre plate.
- 3 Name plate A small panel for a name, a league or a year. Some listings offer engraving.
- 4 Strap Cowhide leather, About 50–51 in (127–130 cm). The plates are fixed to it.
- 5 Snap closure Snaps at the back close the belt. Several snap positions let you adjust the fit.
Specifications
| Build | CNC build: brass plates machined on CNC machines, then finished by hand Plates 2 mm thick (thicker plates, +$50 per mm, in the belt builder) 24K real-gold electroplating (a thin surface layer of real gold) Cowhide leather strap in any colour, about 50–51 in (127–130 cm) Snap closure with several positions |
|---|---|
| Strap | Cowhide leather, About 50–51 in (127–130 cm). Snap closure with several snap positions.Belt sizing and fit |
| Made in | Sialkot, Pakistan. Every belt is made to order. |
| Production | About 5–6 working days after you order. An estimate, not a guarantee. |
| Shipping | Free worldwide courier shipping (UPS, FedEx or DHL), with tracking: delivered in up to 5 working days after dispatch, anywhere in the world. An estimate, not a guarantee. |
| Duties and taxes | Import duties are prepaid by us (DDP), so there are no customs charges to pay on delivery. |
About this design
One fixed build of our custom championship belt. There is nothing to configure on this page: the build is exactly what is listed below.
This build
- Plates: brass, CNC-machined for finer detail and finished by hand, 2 mm thick
- Finish: 24K gold electroplating. This is a thin layer of real gold on the surface of the plates. The belt is not solid gold.
- Strap: cowhide leather, about 50–51 in (127–130 cm) long, with a snap closure and several snap positions
- Made to order in our workshop
What the photos show
The photos show a finished custom belt made for a customer, as an example of our work. Your belt is made for your order. Its plate thickness and metal follow the build on this page.
Making it yours
A name plate engraving is a $25 add-on: your league, team or company name, with the winner's name and the year if you want them. If you would like your own logo, a different plate shape or a fully original design, ask us for a quote before you order.
Is this the right build?
This is the middle-priced of our three gold-plated builds. The plates are machined on CNC machines, which gives finer detail than the SD build, so it suits a logo with small lettering. 2 mm is our standard plate thickness. If you want thicker, heavier plates, 3, 4 or 5 mm plates are available at +$50 per extra millimetre in the belt builder.
Not sure which to pick? Read plate thickness explained and brass or cast zinc alloy plates.
Made to order
How this belt is made
Every belt goes through 7 or 8 phases in our workshop, depending on the build. For a cast belt, casting in a mould takes the place of cutting. Gold electroplating happens only when you choose it or when it is included.
The plates of this belt are cut on CNC machines.
Under normal conditions, most belts are finished in 5–6 working days. For a custom design, the clock starts when you approve the design.
-
Phase 1: Design and artwork
-
Phase 2: Cutting the plates
-
Phase 3: Engraving and detailing
-
Phase 4: Polishing
-
Phase 5: Gold electroplating When 24K gold electroplating is chosen or included
-
Phase 6: Colour filling
-
Phase 7: The leather strap
-
Phase 8: Assembly, final check and packing
Questions
Questions before you order
Short answers about this belt, delivery and returns.
How long does a belt take?
Under normal conditions most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. For a custom design, the clock starts when you approve the design. These are estimates, not guarantees.
Is shipping free?
Yes. Every order ships free worldwide by courier (UPS, FedEx or DHL) with tracking.
We prepay import duties (DDP), so there are no customs charges to pay on delivery.
What are the plates made of?
Brass is the standard plate metal. On custom belts the SD build has brass plates cut and engraved to the design, the CNC build has brass plates CNC-machined for finer detail, and the HD build has zinc alloy plates cast in a mould made for the design and finished by hand, for the deepest 3D relief. On catalogue belts, cast zinc alloy is +$100. Plates are 2 mm thick as standard, and 3, 4 or 5 mm add $50 for each extra millimetre. The strap is cowhide leather.
Is 24K gold electroplating real gold?
Yes, it is a thin layer of real 24K gold on the surface of the plates. The belt is not solid gold, and like any plating it can wear if it is rubbed against something abrasive.
Will the belt fit?
The strap is about 50 to 51 inches (127 to 130 cm) long with a snap closure and several snap positions. That is the length of the whole strap, not a waist size. Email us the wearer's measurement and we will confirm the fit before you order.
Can I put my own names or logo on a belt?
Yes. Name plate engraving can be added on belt pages that offer it. For a logo or a fully custom design, use the belt builder or email support@msbelts.com for a quote. Nothing is made until you approve the design.
Builds
Other builds of this design
The same design, built differently. Each build is a separate listing with its own price.
Want something different? Ask for a quote
Standard-detail brass plates with 24K real-gold electroplating. The lowest-priced of the three builds.
CustomMade to order
Plates cast in a mould and finished by hand, for deeper relief and more weight, with 24K real-gold electroplating. The highest-priced build.
Belt guide
Read before you order
Short, plain guides for people buying their first belt: what a belt costs, the gold finish, plate thickness and how a belt fits.