$579.00
Each choice shows how it changes the price.
A question before you order? Email support@msbelts.com
Independent replica — not affiliated with or licensed by any promotion
ONE World Championship
Total: $579.00
Belt explained
Every belt is a set of metal plates fixed to a leather strap. Here is what each part is, what this belt is made of and how long it takes.
| Promotion | ONE Championship, founded 14 July 2011 by Chatri Sityodtong and Victor Cui; first event 3 September 2011 |
|---|---|
| Old belt | Round middle plate with a silver centre and gold border, and two lions on the side; retired after ten years |
| 2022 belt | Revealed in March 2022: crown with seven red gems above a large ONE logo, side plates with 42 white gems each, natural leather strap, 26.4 pounds |
| Case | TUMI designed the belt's case under a multi-year partnership with ONE |
| Commercial replicas | We found none with a published specification |
| Design in the photos | Gold hexagonal centre plate with a large ONE logo, WORLD and CHAMPION lettering and a crown at the top; two round ONE side plates; no stones |
| Closest build here | Zinc alloy (cast) / 24K gold plated / 4 mm, $579: the nearest match to the design in the photos. Select this build |
| Plates | Brass as standard: cut and engraved to the design, then finished by hand. Cast zinc alloy plates, made in a mould and finished by hand, are available as an upgrade.Brass or cast zinc alloy plates |
|---|---|
| Finish | Standard finish included. 24K real-gold electroplating is available as an upgrade: a thin layer of real gold on the surface of the plates. The belt is not solid gold.Gold electroplating explained |
| Plate thickness | 2 mm as standard. 3, 4 or 5 mm plates are an upgrade, priced per extra millimetre. Thicker plates allow deeper relief in the design and weigh more.Plate thickness explained |
| Strap | Cowhide leather, about 50–51 inches (127–130 cm) long. Snap closure with several snap positions.Belt sizing and fit |
| Made in | Sialkot, Pakistan. Every belt is made to order. |
| Production | About 5–6 working days after you order. An estimate, not a guarantee. |
| Shipping | Free worldwide courier shipping (UPS, FedEx or DHL), with tracking: delivered in up to 5 working days after dispatch, anywhere in the world. An estimate, not a guarantee. |
| Duties and taxes | Import duties are prepaid by us (DDP), so there are no customs charges to pay on delivery. |
| Licensing | Independent replica — not affiliated with or licensed by any promotion |
ONE Championship was founded on 14 July 2011 by Chatri Sityodtong and Victor Cui. This listing is a made-to-order replica by MS Belts of the gold ONE belt design in the photos, with a large ONE logo. The page opens on the closest build to the photos, and every choice shows its price.
ONE launched as ONE Fighting Championship and was renamed ONE Championship in 2015. Its first event was on 3 September 2011 at the Singapore Indoor Stadium. The first world champions, crowned between 2012 and 2014, included Soo Chul Kim at bantamweight and Adriano Moraes at flyweight.
ONE retired its traditional belt after ten years. That design had a round middle plate with a silver centre, a gold border and two lions on the side, and Moraes won one in April 2021 against Demetrious Johnson. A newly designed ONE World Title belt was revealed during ONE X week in March 2022 and first awarded at ONE X on 26 March.
The 2022 belt is described as having a crown with seven red gems above a large ONE logo, side plates with 42 white gems each around the ONE emblem, and a hand-crafted natural leather strap. ONE says it weighs 26.4 pounds. TUMI designed its case, and we found no maker named for the belt itself or any commercial replica specification. The belt in the photos has a similar layout without stones. Our closest build is Zinc alloy (cast), 24K gold plated, 4 mm, which is what this page shows first.
No. The photos show a gold design without stones, so this page describes the design in the photos.
Cast zinc alloy with 24K gold plating at 4 mm, which is where the page opens. The cast build gives the raised ONE logo deeper relief, and the plating matches the gold in the photos.
Custom name plates are quoted by email at support@msbelts.com. Send the wording and the plate you want it on.
Independent replica. MS Belts is not affiliated with, licensed by or endorsed by ONE Championship or any other promotion. Names are used only to describe the design.
Three choices about the plates decide how the belt looks, how it feels in the hand and what it costs.
The plates are the metal parts on the front of the belt. Brass plates are the standard: cut and engraved to the design, then finished by hand. Brass is dense and hard, so the belt feels solid. Cast zinc alloy plates are made in a mould and finished by hand, for deeper 3D relief.
Brass plates are included. Cast zinc alloy plates add $100.
Brass or cast zinc alloy plates24K real-gold electroplating is a thin layer of real gold on the surface of the plates. The belt is not solid gold, and the standard finish has no gold layer.
24K real-gold electroplating adds $20.
Gold electroplating explainedThickness is how thick the metal plates are, in millimetres. 2 mm is included, and you can go up to 5 mm. Thicker plates allow deeper relief in the design and weigh more.
2 mm is included. Each extra millimetre adds $50, up to 5 mm.
Plate thickness explainedMade to order
Every belt goes through 7 or 8 phases in our workshop, depending on the build. For a cast belt, casting in a mould takes the place of cutting. Gold electroplating happens only when you choose it or when it is included.
Under normal conditions, most belts are finished in 5–6 working days. For a custom design, the clock starts when you approve the design.
Phase 1: Design and artwork
Phase 2: Cutting the plates
Phase 3: Engraving and detailing
Phase 4: Polishing
Phase 5: Gold electroplating When 24K gold electroplating is chosen or included
Phase 6: Colour filling
Phase 7: The leather strap
Phase 8: Assembly, final check and packing
Questions
Short answers about this belt, delivery and returns.
Under normal conditions most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. For a custom design, the clock starts when you approve the design. These are estimates, not guarantees.
Yes. Every order ships free worldwide by courier (UPS, FedEx or DHL) with tracking.
We prepay import duties (DDP), so there are no customs charges to pay on delivery.
Brass is the standard plate metal. On custom belts the SD build has brass plates cut and engraved to the design, the CNC build has brass plates CNC-machined for finer detail, and the HD build has zinc alloy plates cast in a mould made for the design and finished by hand, for the deepest 3D relief. On catalogue belts, cast zinc alloy is +$100. Plates are 2 mm thick as standard, and 3, 4 or 5 mm add $50 for each extra millimetre. The strap is cowhide leather.
Yes, it is a thin layer of real 24K gold on the surface of the plates. The belt is not solid gold, and like any plating it can wear if it is rubbed against something abrasive.
The strap is about 50 to 51 inches (127 to 130 cm) long with a snap closure and several snap positions. That is the length of the whole strap, not a waist size. Email us the wearer's measurement and we will confirm the fit before you order.
Yes. Name plate engraving can be added on belt pages that offer it. For a logo or a fully custom design, use the belt builder or email support@msbelts.com for a quote. Nothing is made until you approve the design.
Belt guide
Short, plain guides for people buying their first belt: what a belt costs, the gold finish, plate thickness and how a belt fits.
