$559.00
Each choice shows how it changes the price.
A question before you order? Email support@msbelts.com
Independent replica — not affiliated with or licensed by any promotion
NWA World Women's Championship
Total: $559.00
Belt explained
Every belt is a set of metal plates fixed to a leather strap. Here is what each part is, what this belt is made of and how long it takes.
| Title | NWA World Women's Championship; established in 1950 with Mildred Burke as first champion |
|---|---|
| Names | NWA Women's Championship from 1950 to 2016, then NWA World Women's Championship |
| Most reigns | The Fabulous Moolah, four recognised reigns |
| WWF | In 1983 Moolah sold the belt to the WWF, where it became the WWF Women's Championship |
| Current belt | Presented by Billy Corgan on 30 September 2019 and made by Belts By Dan |
| Design per Wikipedia | Three silver plates on a white strap, 12 red gems, shields with wrestlers, oval NWA side plates, a centre photo |
| Replica design | Silver main plate with a portrait and 1948 above it, a shield, red stones and two oval NWA plates, on a white strap |
| Closest build here | Zinc alloy (cast) / Standard / 4 mm, $559: the nearest match to the real belt. Select this build |
| Plates | Brass as standard: cut and engraved to the design, then finished by hand. Cast zinc alloy plates, made in a mould and finished by hand, are available as an upgrade.Brass or cast zinc alloy plates |
|---|---|
| Finish | Standard finish included. 24K real-gold electroplating is available as an upgrade: a thin layer of real gold on the surface of the plates. The belt is not solid gold.Gold electroplating explained |
| Plate thickness | 2 mm as standard. 3, 4 or 5 mm plates are an upgrade, priced per extra millimetre. Thicker plates allow deeper relief in the design and weigh more.Plate thickness explained |
| Strap | Cowhide leather, about 50–51 inches (127–130 cm) long. Snap closure with several snap positions.Belt sizing and fit |
| Made in | Sialkot, Pakistan. Every belt is made to order. |
| Production | About 5–6 working days after you order. An estimate, not a guarantee. |
| Shipping | Free worldwide courier shipping (UPS, FedEx or DHL), with tracking: delivered in up to 5 working days after dispatch, anywhere in the world. An estimate, not a guarantee. |
| Duties and taxes | Import duties are prepaid by us (DDP), so there are no customs charges to pay on delivery. |
| Licensing | Independent replica — not affiliated with or licensed by any promotion |
The NWA World Women's Championship has been the NWA's women's world title since 1950. This listing is MS Belts' made-to-order replica of the current silver design on a white strap, with its centre photo and red stones. The page opens on the build closest to the real belt, and every choice shows its price.
Wikipedia says the NWA established the title in 1950, with Mildred Burke as first champion because her 1937 win over Clara Mortensen was recognised as the NWA title. It was the NWA Women's Championship until 2016 and has carried its current name since.
The Fabulous Moolah has the most reigns with four. In 1983 she sold the physical belt to the WWF, where it became the WWF Women's Championship, and the NWA title's lineage continued separately. NWA President Billy Corgan presented the current belt on 30 September 2019.
Wikipedia says the current belt was made by Belts By Dan and has three silver plates on a white strap with 12 red gems. The photo in the centre is updated with every champion. We found no commercial replica with published specifications. Our closest build is zinc alloy (cast), standard, 4 mm, which is what this page shows first.
Wikipedia says the photo on the current belt is updated with every champion. The portrait on our replica is part of the plate design shown in our photos.
Cast zinc alloy, standard finish, 4 mm, which this page shows first. Cast zinc finishes silver-grey like the real plates, while standard brass is yellow.
Yes. Custom name plates and engraving are quoted by email at support@msbelts.com.
Independent replica. MS Belts is not affiliated with, licensed by or endorsed by NWA or any other promotion. Names are used only to describe the design.
Three choices about the plates decide how the belt looks, how it feels in the hand and what it costs.
The plates are the metal parts on the front of the belt. Brass plates are the standard: cut and engraved to the design, then finished by hand. Brass is dense and hard, so the belt feels solid. Cast zinc alloy plates are made in a mould and finished by hand, for deeper 3D relief.
Brass plates are included. Cast zinc alloy plates add $100.
Brass or cast zinc alloy plates24K real-gold electroplating is a thin layer of real gold on the surface of the plates. The belt is not solid gold, and the standard finish has no gold layer.
24K real-gold electroplating adds $20.
Gold electroplating explainedThickness is how thick the metal plates are, in millimetres. 2 mm is included, and you can go up to 5 mm. Thicker plates allow deeper relief in the design and weigh more.
2 mm is included. Each extra millimetre adds $50, up to 5 mm.
Plate thickness explainedMade to order
Every belt goes through 7 or 8 phases in our workshop, depending on the build. For a cast belt, casting in a mould takes the place of cutting. Gold electroplating happens only when you choose it or when it is included.
Under normal conditions, most belts are finished in 5–6 working days. For a custom design, the clock starts when you approve the design.
Phase 1: Design and artwork
Phase 2: Cutting the plates
Phase 3: Engraving and detailing
Phase 4: Polishing
Phase 5: Gold electroplating When 24K gold electroplating is chosen or included
Phase 6: Colour filling
Phase 7: The leather strap
Phase 8: Assembly, final check and packing
Questions
Short answers about this belt, delivery and returns.
Under normal conditions most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. For a custom design, the clock starts when you approve the design. These are estimates, not guarantees.
Yes. Every order ships free worldwide by courier (UPS, FedEx or DHL) with tracking.
We prepay import duties (DDP), so there are no customs charges to pay on delivery.
Brass is the standard plate metal. On custom belts the SD build has brass plates cut and engraved to the design, the CNC build has brass plates CNC-machined for finer detail, and the HD build has zinc alloy plates cast in a mould made for the design and finished by hand, for the deepest 3D relief. On catalogue belts, cast zinc alloy is +$100. Plates are 2 mm thick as standard, and 3, 4 or 5 mm add $50 for each extra millimetre. The strap is cowhide leather.
Yes, it is a thin layer of real 24K gold on the surface of the plates. The belt is not solid gold, and like any plating it can wear if it is rubbed against something abrasive.
The strap is about 50 to 51 inches (127 to 130 cm) long with a snap closure and several snap positions. That is the length of the whole strap, not a waist size. Email us the wearer's measurement and we will confirm the fit before you order.
Yes. Name plate engraving can be added on belt pages that offer it. For a logo or a fully custom design, use the belt builder or email support@msbelts.com for a quote. Nothing is made until you approve the design.
Belt guide
Short, plain guides for people buying their first belt: what a belt costs, the gold finish, plate thickness and how a belt fits.
