Finish
24K real-gold electroplating is a thin layer of real gold on the surface of the plates. The belt is not solid gold, and the standard finish has no gold layer.
24K real-gold electroplating adds $20.
Gold electroplating explained
Made to order
NWA United National Championship
$509.00
Choose your build
Each choice shows how it changes the price.
Delivery and returns
- Made to order in our workshop, which has been making belts for over a decade. Most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. These are estimates, not guarantees.
- Free worldwide courier shipping (UPS, FedEx or DHL), tracked and insured.
- Import duties prepaid (DDP): nothing to pay on delivery.
- Cancel free of charge within 24 hours of ordering.
- Made to order, so no change-of-mind returns. Arrived damaged, faulty or not as ordered? Email us photos within 14 days of delivery and we repair, replace or refund it. If we ask for the belt back, we pay the return shipping. Returns policy
- Lifetime warranty on plating, hardware and stitching.
A question before you order? Email support@msbelts.com
Independent replica — not affiliated with or licensed by any promotion
NWA United National Championship
Total: $509.00
Belt explained
What you are buying
Every belt is a set of metal plates fixed to a leather strap. Here is what each part is, what this belt is made of and how long it takes.
The parts of a belt
Illustration
- 1 Centre plate The large plate in the middle of the belt. It carries the main design.
- 2 Side plates Smaller plates set on each side of the centre plate.
- 3 Name plate A small panel for a name, a league or a year. Some listings offer engraving.
- 4 Strap Cowhide leather, about 50–51 inches (127–130 cm) long. The plates are fixed to it.
- 5 Snap closure Snaps at the back close the belt. Several snap positions let you adjust the fit.
NWA United National Championship: the real belt
| Promotion | NWA Los Angeles, Japan Pro Wrestling Alliance and All Japan Pro Wrestling |
|---|---|
| First champion | Dale Lewis, who won a tournament in October 1970 |
| Most reigns | Jumbo Tsuruta, six |
| Unified | 1989, into the Triple Crown Heavyweight Championship |
| David Von Erich | One reign, 3 to 10 February 1984, per Wikipedia; his name is on the plate in our photos |
| Replica design | Gold plate with a crown, scrolled edge and two wrestlers over an oval, on a red backing |
| Side plates | Six round domed gold plates in scalloped frames, on a black strap |
| Closest build here | 24K gold plated / 4 mm, $509: the nearest match to the real belt. Select this build |
How we make this belt
| Plates | Zinc alloy, cast in a mould made for this design, then finished by hand. |
|---|---|
| Finish | Standard finish included. 24K real-gold electroplating is available as an upgrade: a thin layer of real gold on the surface of the plates. The belt is not solid gold.Gold electroplating explained |
| Plate thickness | 2 mm as standard. 3, 4 or 5 mm plates are an upgrade, priced per extra millimetre. Thicker plates allow deeper relief in the design and weigh more.Plate thickness explained |
| Strap | Cowhide leather, about 50–51 inches (127–130 cm) long. Snap closure with several snap positions.Belt sizing and fit |
| Made in | Sialkot, Pakistan. Every belt is made to order. |
| Production | About 5–6 working days after you order. An estimate, not a guarantee. |
| Shipping | Free worldwide courier shipping (UPS, FedEx or DHL), with tracking: delivered in up to 5 working days after dispatch, anywhere in the world. An estimate, not a guarantee. |
| Duties and taxes | Import duties are prepaid by us (DDP), so there are no customs charges to pay on delivery. |
| Licensing | Independent replica — not affiliated with or licensed by any promotion |
About this design
The NWA United National Championship was a heavyweight title best known for its defences in All Japan Pro Wrestling. This listing is MS Belts' made-to-order replica of the gold crown design with a red backing, cast in zinc alloy. The page opens on the build closest to the real belt, and every choice shows its price.
About the NWA United National Championship
Wikipedia traces the first reign to October 1970, when Dale Lewis won a tournament to become champion. The title was used by NWA Los Angeles, the Japan Pro Wrestling Alliance and All Japan Pro Wrestling, and Jumbo Tsuruta holds the most reigns with six.
It was unified into the Triple Crown Heavyweight Championship in 1989, and the page says the same belt stayed in use for the Triple Crown until 2013. The name plate in our photos reads David Von Erich. Wikipedia lists his single reign as running from 3 February 1984 until his death on 10 February 1984.
Design details
- Centre plate: a large gold plate with a scrolled, ornate edge and a crown at the top. "United National Champion" arches above two wrestlers locked up over a stippled oval.
- Name plate: a silver-coloured strip across the lower plate, reading David Von Erich in our photos, with small blue stones set under the crown.
- Backing: red leather shows around the edge of the centre plate.
- Side plates: six round, domed gold plates in scalloped four-point frames, three on each side.
- Strap: black leather with double-stitched edges.
The real belt and commercial replicas
Wikipedia gives no maker, material or weight for the belt, and we found no commercial replica with published specifications, so this build follows our photographs. Our closest build is zinc alloy (cast), 24K gold plated, 4 mm, which is what this page shows first.
How we make it
- Plates: cast zinc alloy, poured in a mould made for the design, then hand finished.
- Finish: standard (silver-grey) or 24K gold plated for +$20. The gold is a thin electroplated layer, not solid gold.
- Thickness: 2 mm comes with the base build. Go up to 5 mm at +$50 per extra millimetre.
- Strap: cowhide leather, about 50–51 in (127–130 cm), fastened with snaps in several positions. Any size from kids to jumbo, and any strap colour, can be quoted by email.
- Made to order: check the delivery estimate on this page.
- Shipping: free worldwide courier (UPS, FedEx or DHL), tracked, with import duties prepaid (DDP).
- Warranty: lifetime on plating, hardware and stitching.
Questions
Questions about this belt
Which finish looks closest to the photos?
24K gold plated, which this page shows first. Our plates are cast zinc alloy, so the standard finish is silver-grey, not yellow.
Is the gold real?
The 24K option is a thin electroplated layer of real gold on the plates. The belt is not solid gold.
Can the name plate be changed?
Yes. Custom name plates and engraving are quoted by email at support@msbelts.com.
Independent replica. MS Belts is not affiliated with, licensed by or endorsed by NWA or any other promotion. Names are used only to describe the design.
The three choices, in short
Three choices about the plates decide how the belt looks, how it feels in the hand and what it costs.
-
-
Plate thickness
Thickness is how thick the metal plates are, in millimetres. 2 mm is included, and you can go up to 5 mm. Thicker plates allow deeper relief in the design and weigh more.
2 mm is included. Each extra millimetre adds $50, up to 5 mm.
Plate thickness explained
Made to order
How this belt is made
Every belt goes through 7 or 8 phases in our workshop, depending on the build. For a cast belt, casting in a mould takes the place of cutting. Gold electroplating happens only when you choose it or when it is included.
Under normal conditions, most belts are finished in 5–6 working days. For a custom design, the clock starts when you approve the design.
-
Phase 1: Design and artwork
-
Phase 2: Cutting the plates
-
Phase 3: Engraving and detailing
-
Phase 4: Polishing
-
Phase 5: Gold electroplating When 24K gold electroplating is chosen or included
-
Phase 6: Colour filling
-
Phase 7: The leather strap
-
Phase 8: Assembly, final check and packing
Questions
Questions before you order
Short answers about this belt, delivery and returns.
How long does a belt take?
Under normal conditions most belts are made in 5–6 working days, then delivered by courier in up to 5 working days, anywhere in the world. For a custom design, the clock starts when you approve the design. These are estimates, not guarantees.
Is shipping free?
Yes. Every order ships free worldwide by courier (UPS, FedEx or DHL) with tracking.
We prepay import duties (DDP), so there are no customs charges to pay on delivery.
What are the plates made of?
Brass is the standard plate metal. On custom belts the SD build has brass plates cut and engraved to the design, the CNC build has brass plates CNC-machined for finer detail, and the HD build has zinc alloy plates cast in a mould made for the design and finished by hand, for the deepest 3D relief. On catalogue belts, cast zinc alloy is +$100. Plates are 2 mm thick as standard, and 3, 4 or 5 mm add $50 for each extra millimetre. The strap is cowhide leather.
Is 24K gold electroplating real gold?
Yes, it is a thin layer of real 24K gold on the surface of the plates. The belt is not solid gold, and like any plating it can wear if it is rubbed against something abrasive.
Will the belt fit?
The strap is about 50 to 51 inches (127 to 130 cm) long with a snap closure and several snap positions. That is the length of the whole strap, not a waist size. Email us the wearer's measurement and we will confirm the fit before you order.
Can I put my own names or logo on a belt?
Yes. Name plate engraving can be added on belt pages that offer it. For a logo or a fully custom design, use the belt builder or email support@msbelts.com for a quote. Nothing is made until you approve the design.
Belt guide
Read before you order
Short, plain guides for people buying their first belt: what a belt costs, the gold finish, plate thickness and how a belt fits.